Return to GasserMagazine.com

SWAP MEET

SWAP MEET ads will, as a rule, be run for one issue in GASSER Magazine before being placed on the club's website. This will allow members who don't use computers to have an equal opportunity to purchase cars or parts. SWAP MEET ADS are FREE but ONLY MEMBERS may advertise in either the magazine or on the club website. JOIN THE CLUB! For new ads or changes, use the contact information in the magazine or on this website. Thanks, Ernest McIntyre, editor

My Photo
Name:
Location: United States

Friday, February 7, 2020

1939 WILLYS OVERLAND SEDAN FOR SALE

4 door sedan, VERY RARE and Unique
Street rod setup, about 3/4 complete,
All steel, in great shape
No rust or Bondo (a tiny dent in rear, easily fixable)

LS-5 '70 Chevelle 454 c.i. 390 hp engine
Paint is Dodge "Plum Crazy" + "Ultra Violet Poly"
(purple, with red & blue pearl)

New parts include:
Ceramic coated headers from Jeg's, polished aluminum color ~ Griffin Radiator, custom built to fit inside Willys hood ~ Spal Radiator Fan 16" high performance 2360 CFM ~ 700R4 transmission built by Bow Tie Overdrives to Corvette specs + high performance pressure pump and extra clutch pack ~ B&M Light Truck Megashifter from Jeg's ~ 9" Ford rear end ~ Mustang front end with rack & pinion steering (not new) ~ Lowering block kit, rear housing mounts, driveshaft loop ~ Braided brake lines with banjo fittings for Heidt drop spindle ~ AutoMeter racing gauges: Pro-Comp2 memory tach, Pro-Comp speedometer, 2" gauges for fuel, oil pressure, water temp, vacuum, and voltmeter ~ Summit Racing fuel cell, ladder bar, universal cross member, lowering block kit, housing mount, drive shaft loop ~ U-joints and rod ends from R.B.'s Obsolete Automotive ~ Master Power Brakes pedal assembly with booster/master cylinder, hardware, weld on ~ American Racing Torq-Thrust D one piece alloy wheels, 15 x 8 and 15 x 4 1/4 ~ Comp T/A Drag Radial Tires 275/60R15 and 195/60R15 ~ Chassis Engineering front sway bar ~ 2" drop spindles from Heidt's Hot Rod Shop ~ Bob Drake inside window and door handles, chrome ~ 12V wiper motor from Car Custom Inc. ~ Extra pair of '39 Willy's Overland "sleepy eye" headlight lenses

Still needs: Wiring harness, upholstery, front seats,
gas and brake lines, rubber around doors and trunk

$17,000 CASH
No trades or spammers. Serious inquiries only.
Must sell to pay for husband's medical expenses.

The Crawfords ~ Marana, AZ  85653

bikerbarb777@gmail.com  ~ 406-897-4850





Sunday, December 1, 2019

1969 OPEL GT

PROSTREET
540 Dart, ,BDS 8:71 Supercharger, Hilborn  EFI Injection, Lenco 4 speed, 9" Ford, Eagle Crank, Zoomie hedders open w/switch, Cruise Control, Comp Roller Cam, Edelbrock heads, Crane Roller Rockers, Strange Axles, 15 gal Fuel Cell, Fiberglass removable front clip, starts every time, many more items. Won 1st place 2017 Autorama in Prostreet.
Serious offers considered.  $ 47,500
Call Jim at 216-251-7667   email: jasimonson74@yahoo.com


Wednesday, November 27, 2019

SOLD: 'HELLACIOUS ANGLIA'

ISSUE 149 went to print before the late Bob Sarkisian's HELLACIOUS Anglia was sold.  
No sense calling to buy it.  Its gone.  Word is that the new owner is going to put a smaller engine in it.  Bob would be glad to know his Anglia is going to be heading back to the track.  

My thanks to England's premier cartoonist, COLIN HARDY, for his tribute to Bob Sarkisian.  


FOR SALE: STEEL '37-'42 WILLYS


NEW 'REAL STEEL' 2018 BODY
www.RolandsRodShop.com
For Information, call:  (503) 703-2340

OFFICIAL OHIO GEORGE BOOK

‘Ohio George’ Montgomery is the recipient of the NHRA Lifetime Achievement Award as is listed as one of drag racings TOP 50 drivers of all time.  He raced against all the GASSER Legends’ cars including ‘Big John’ Mazmanian and Stone, Woods & Cook.  He drove his ‘33 Willys to victory after victory.  

After retiring, he became one of the most successful engine builders in the country.  This is his story.  The cool thing is that you can order it from him directly AND he’ll even sign it for you.  A great read and a great collectors item. 
$34.95+ $6 S/H
To Order Call:  (937) 233-0353
or mail a check to:
Ohio George Montgomery
716 Brantley Ave, Dayton, OH 45404

FOR SALE: WILLYS PARTS

WANT WILLYS PARTS?
Call Ron Ladley (610) 584-1665

FOR SALE: M/T FINNED VALVE COVERS

FOR SALE: FINNED M/T VALVE COVERS & MORE
Mickey Thompson finned valve covers for SBC:  $100
Gasser Magazine collection (every issue), make offer. Michigan
CALL BC (989) 329-9476

FOR SALE: COLLECTIBLES

FOR SALE:  COLLECTIBLES
Small collection of hot rod, muscle car tees and posters.  Have Beach Boys Willys Tee.  
Stan Fairfax
PO Box 7283, Loveland, CO 80537-0283

FOR SALE: 1941 WILLYS COUPE

FOR SALE:  1941 WILLYS COUPE
All steel except glass trunk lid, very nice steel trunk lid goes with the car.
One of the very best you will find. Enclosed delivery possible. In MD.
www.ericsmusclecars.com

FOR SALE: WILLYS PARTS

FOR SALE:  WILLYS PARTS
’40 steel hood (modified), ‘41 frame, garnish moldings, fiberglass and other assorted parts.
Kenny: (631) 767-9170

FOR SALE: '41 WILLYS GASSER SEDAN


FOR SALE:  WILLYS GASSER SEDAN
All Steel, Legal C/G & Street legal. Original frame, Ford 9",
Alien SBC with dual AFB's. Disc brakes. CA title. Rust patina, new window glass.  
 Reduced to $24,000
Jerry:  (860) 347-2600    gasser41@att.net

FOR SALE: NOS '41 WILLYS GRILLE

FOR SALE:  NOS ‘41 WILLYS GRILLE
$600 + shipping
Jerry Augustine (860) 347-2600

FOR SALE: TUNNEL RAM

FOR SALE:  TUNNEL RAM
Edelbrock Big block Chevy square port tunnel ram intake complete with a pair of 600 Holleys, Russell braided stainless steel fuel lines and throttle linkage. Clean/no issues. Carbs might need kits.
$750 or trade for 409 Chevy parts
 Darrell: 804-943-2283 66stingraycoupe@gmail.com

FOR SALE: WILLYS PICKUP FRAME

FOR SALE:  WILLYS FRAME
1938-1941 original Willy’s pickup truck chassis, complete with the the original gas tank and pedals.
Rolling, no holes just surface rust. 
$750 OBO  ~  Call:  860-480-4378 
senseidragan@gmail.com

FOR SALE: RARE 1942 WILLYS PICKUP

FOR SALE:  RARE 1942 WILLYS PICKUP
Only 11,919 made! Original & has vacuum fan. Will consider partial trade for Anglia 
$75,000 ~ David: 361-284-3210

FOR SALE: '35 DODGE COUPE

FOR SALE:  ’35 DODGE COUPE
426 Hemi, Tremic 5-speed, Ford 9”, 430 ring & pinion, Detroit locker, Baer 4-wheel disc brakes.
In Colorado
$120,000 OBO ~ Patrick (303) 918-4861

FOR SALE: VERTEX & HEADS

FOR SALE:  VERTEX MAGNETO & HEADS
--Magneto w/plug wires and rain cap cover for SBC.  $500 
--461 Camelback Heads with installed valves & springs.  $350  
CALL BC
(989) 329-9476

FOR SALE: 3 WILLYS PACKAGE DEAL

FOR  SALE:  3 WILLYS in package deal. Will not separate.

(1) 1938 Willys Coupe - I bought this rust bucket car out of Pennsylvania/  Some metal work is done but she needs lots more. This car has a clean and current title, and is currently registered as a "non op" in California. Original running gear is still in the car. It does not run, but it is a roller. I have new glass still in the package.

(2) 1937 Willys 4dr Sedan - I bought this car for parts for the coupe. I was going to build the doors for the coupe out of the 4 doors from the sedan. I was going to use as much of the sedan body as I could that would/could be fabricated from this car. This body and frame have little/no rust. It has no running gear but there is a Ford rear end in the car. The previous owner welded in a Mustang II (factory) front cross member and suspension. I don't know if it's right or not, as I was not interested in that, at the time. I have no title or paperwork on this car, as was my intention to use it for parts. I couldn't bring myself to cut the car up.  This car is a roller.

(3) 1937 Willys 4dr Sedan - This car is the best of the three. It has no rust in the body or frame. I purchased it from a guy that was going to build a gasser out of it. The frame has been cleaned and the body has been primered. It has no running gear but there is a Ford rear end in the car. It is a roller. I have an old California title to the car but it has not been registered in many years. I'm sure it is out of the DMV system and the VIN number will have to be verified. I also have some misc parts that go with the cars.  I am selling the whole package or none. I need to get these out of my way. I have too many other projects under construction at this time.  Cars are in northern California.
$30,000 for all of the above
email JOE: Bowtieman31@comcast.net

FOR SALE: 408 C.I. SMALL BLOCK CHEVY

FOR SALE:  408 c.i. SBC
Silvalight pistons, 5.7 rods w ARP bolts, externally balanced, assembled, comp hydraulic cam, dual pattern, factory aluminum.  4-barrel, intake, balance and flex plate.  5 qt oil pan and HD oil pump.  Over $3,000 in parts and assembly.  Engine was built for hauling car and trailer, is new and has never been started.  In Michigan.
Asking $2,400 OBO
CALL BC (989) 329-9476 

FOR SALE: WILLYS STEEL FRONT END

FOR SALE: WILLYS Steel Front End
1935-36 WILLYS steel front end with horn covers, bumper and brackets.  
$4,000 OBO
Harvey:  (480) 833-3388

FOR SALE: OUTLAW STREET '41 WILLYS

FOR SALE:  OUTLAW STREET ‘41 WILLYS
502 c.i. Chevy: Blown, B&M Mega blower, two 750 Holleys, MSD ignition, Comp Cam, Sanderson street rod comp headers, custom 3” with Flowmaster Pro Comp mufflers. Drivetrain includes 3500 stall Turbo 400 with a B&M shifter and 9” narrowed Ford rear end. Chassis is tubular steel with custom crossmembers, Strange struts’ front suspension, 4-link rear suspension, rack and pinion steering, Dials Race Shoop cage and roll bar.  Brakes are 11” disks on all four Budnik wheels. Construction was by Clayton Custom Cars, paint by Buck Wilson Hot Rods, interior was done by Buck’s Upholstery.  Husband passed away.  Car is in Oklahoma.
$100,000 OBO
For more info:  Lauren sublimelauren@yahoo.com

FOR SALE: 540 C.I. '41 WILLYS

FOR SALE: 540 Inch ‘41 WILLYS
Flat black fiberglass coupe.  540 c.i. Dart Big M Mark IV, JE 8.5:1 forged blower, Comp Cams 673/.673, Callies 4340 Dragon Slayer crank, B & M Mega 420/Holley, Dart 325 cc Pro 1 aluminum heads, Bob Butler 2.125” custom headers, four Flowmaster mufflers, Turbo 400 w/shift kit, B&M Mega shifter, SFI Flexplate, B&M 2400 Holeshot torq due converter, 9” Ford posit 3.25 gears rear end, 2x3 inch steel tube frame, 4-point Chromoly roll bar, Heidts Superride II front suspension, 4 link coil over rear suspension, Wilwood vented disc brakes front and rear, 195-15 tires on Weld Rod Lite 15x6 front wheels, 31x18.50-15 on 15 x14 rear wheels.  Lettering by Tbd Graphics.  Upholstery is a work in progress.  Santee, CA 92701
$40,000
Contact Richard Bell:  (619) 894-6990
540inchWillys@gmail.com  

FOR SALE: '51 HENRY J

FOR SALE:  1951 HENRY J
Trunk model, channeled over S-10 frame, 350/350, PS, PB, disc front, drum rear,, tilt wheel, good glass, B&M quick silver shifter, all lights and signals work.
$12,500 no trades ~ Dan:  (860) 643-8149

FOR SALE: SACKSTEDER WILLYS


RACE READY GASSER
Gibbons ‘glass body, Willys Unlimited boxed, repro steel frame; Roll cage & frame reinforced and certified to 7 seconds; 9” Ford rearend with Strange axles; Wilwood disc brakes all around, 417 Donovan block--398 ci; Bryant crank; Boxed Aluminum rods; Hothead Aluminum heads, ported and polished by Alan Johnson; Hotheads intake manifold with Littlefield 671 supercharger; Hilborn 4-hole with 8 injectors by Gene Adams; Mallory magneto; BTE Powerglide transmission; Halibrand style wheels with 17” slicks on rear.  Runs consistent 8.50s and has run 8.30s.  One of the most beautiful Willys.  Built, owned and driven by the late Randy Sacksteder. Car is in pristine condition. 
Reduced to
$100,000 Or Best Offer 
Terry: (513) 535-0203
TerryBourquein@hotmail.com

WANTED: FENDERWELL HEADERS

Need FENDERWELL Headers
for FE Engine that will work in a 55-57 Ford Custom.  
Call SMITTY:  (314) 420-1443

Sunday, March 24, 2019

WANTED: 1940 WILLYS HEADLIGHT RING

Will accept rusted or pitted.
Bob Hamilton 1-519-458-8466
RR#1 Princeton, Ontario, Canada 

1940 WILLYS FRONT END

Hood is uncut, fenders need work, centre section missing parts
$1600 USD plus freight. 
Bob Hamilton 1-519-458-8466
RR#1 Princeton, Ontario, Canada 

FOR SALE: BACK ISSUES

GASSER MAGAZINE back issues. 
Call with issues needed $3.00 each, plus shipping. 
Gasser Wars Mags issues #36 to #111 - $75.00 for all. 
Bob Hamilton 1-519-458-8466
RR#1 Princeton, Ontario, Canada 

Sunday, March 18, 2018

1939 WILLYS SEDAN



Project Car, Fatman front end, 700 R Trans rebuilt,
350 Chevy engine rebuilt, Ford 9 inch, new NASCAR 356 gears, many extras.  Located in Dallas area.

$7,500

Call Ralph, anytime at:  (903) 267-3344

Saturday, April 8, 2017

WILLYS COUPE FOR SALE




NHRA CERTIFIED, NEVER RACED 572" WILLYS
$57,000
Bob:  848-992-0139  BrenBob@comcast.net

Thursday, October 13, 2016

FOR SALE: KS PITTMAN'S RACE READY 33 WILLYS

KS's RACE READY REAL DEAL
This was K.S. Pittman's car.  Then he partnered with Bob Clayton
who rebuilt it to current SFI standards and NHRA certifications.
Blown 460 ci BB Chevy, Art Car trans and torque converter.
SPEEDY BOB NEVINS  520-298-6919 ~ bnevins@cox.net

FOR SALE OR TRADE: '41 WILLYS COUPE

ALL STEEL 1941 WILLYS COUPE
Keith Black 540 cubic inch all aluminum Hemi. 871 BDS supercharger with 16 port fuel injection.
Chrysler A518 tranny, 3500 stall, Zero miles.  Mark Williams polished-chromed rear end. Art Morrison chassis.
Wilwood 6 piston 13" disc brakes on front, 12 inch 6 piston on rear.
ABS electronic controller, all leather interior, LED lights, 
Over $500,000 invested.
$249,000
Mike:  608-787-0797

FOR SALE: '33 WILLYS


GLASS BODIED '33 WILLYS COUPE
471 Blown V6.  Disk brakes, 9" Ford Rearend.
$26,500 OBO
David:  361-284-3210

FOR SALE: '40 WILLYS SEDAN 'BARN FIND'

Unfinished 4DR project in storage for 20+ years.
All steel, straight body, 350 Chevy with Turbo 350, Mustang II front end. 
Car is in storage near Houston, Texas.
$17,000 OBO
Terry:  918-935-5590

FOR SALE: '48 ANGLIA

Old JR Patrick car.  Still has Tennessee title.  Pics don't do it justice.  On eBay.
Needs wiring harness.  Everything is new or rebuilt.
402 BBC, Turbo 350.  About 425 HP.  Nice car.
In process of making it street legal.  
$25,000
John: 432-213-4505  ~  396Anglia@gmail.com

FOR SALE: 1948 ANGLIA


VIPER RED '48 ANGLIA
Fiberglass body on chrome moly tube pro chassis with electric tilt front end and trunk.  8-point roll cage wrapped with grey cloth material.  Billet aluminum side and front grilles, electric door poppers for suicide doors with safety pin.  496 cubic inch GM big block.  Twin Holley 750 cfm carbs on custom intake manifold with polished aluminum Holley blower.  Forged 8:1 pistons, roller cam, lifter rockers with stud girdle, MSD 6 Series, Griffin aluminum radiator with electric fan, 7 qt Moroso pan.  Tranny is a 4-speed, Super T-10, heavy duty unit.  9-inch Ford differential, 3.50:1 ratio, posi unit with Strange half shafts.  Car is in Toronto, Canada.

Bob:  416-234-0164